Quiet bathroom extractor fan Ø100 with white glass cover, humidity sensor and timer
- Quiet operation for smaller bathrooms and sanitary rooms.
- Humidity sensor and timer for automatic operation.
- White matt glass panel for a clean and neat appearance.
- Suitable for wall or ceiling mounting.
Description
Quiet removal of moisture and unpleasant odors in smaller spaces
This bathroom extractor fan is intended to extract humid air and unpleasant odors from bathrooms, toilets, and other smaller rooms in the home. It is suitable for spaces up to approximately 9 m².
Main advantages
- Automatic operation: with humidity sensor and timer.
- Quiet operation: with a noise level of 28 dB(A) at a distance of 1 m and 26 dB(A) at a distance of 3 m.
- Elegant appearance: with a white matte glass panel that completely covers the front.
- Easy cleaning: as the glass panel can be removed with a safety snap system.
- Flexible installation: on the wall or on the ceiling.
- Suitable for smaller spaces: with a round Ø100 opening or duct.
Operation and control
The fan operates with two functions at the same time. The humidity sensor allows the relative humidity threshold to be set in the range from 40% to 80%. When the humidity exceeds the set value, the fan switches on automatically and runs until the air is dry, and then for about 3 minutes longer.
The timer enables delayed switch-off. The fan switches on when the power is turned on, for example via the same switch as the light, and after the light is switched off it continues to run for the set time of 3 to 23 minutes. Both settings are adjusted with a screwdriver on the potentiometers in the fan. Operation requires a three-core connection cable: phase conductor, neutral conductor, and control conductor.
Technical specifications
| Connection diameter | 100 mm |
|---|---|
| Airflow | 93 m³/h |
| Noise level | 28 dB(A) at 1 m; 26 dB(A) at 3 m |
| Power | 11 W |
| Power supply | 220–240 V, 50–60 Hz |
| Protection rating | IPX2 |
| Control | humidity sensor and timer |
| Humidity setting | 40% to 80% |
| Switch-off delay | 3 to 23 minutes |
| Number of speeds | 1 |
| Bearings | ball bearings |
| Installation | on the wall or on the ceiling |
| Cover | white matte glass panel, 175 × 175 mm |
| Housing dimensions | front panel 120 × 120 mm; depth 89 mm; connection spigot length 69 mm |
| Warranty | 3 years |
Frequently asked questions
Is the fan suitable for a small bathroom?
Yes, it is suitable for bathrooms and sanitary rooms up to approximately 9 m².
How are the humidity and operating time set?
Both settings are adjusted with a screwdriver on the potentiometers in the fan.
Can it be mounted on the ceiling?
Yes, the fan is suitable for wall or ceiling installation.
Conclusion
This is a reliable solution for automatic removal of moisture and unpleasant odors in smaller spaces, with simple control, quiet operation, and a glass cover for a neat appearance.
Product Details
- MaterialGlass
Plastic - Colorwhite
- Diameter (mm)100
- Airflow (m³/h)93
- Noise level (dB(A))28
- Electrical power (W)11
- Voltage / frequency / phases220-240 V / 50-60 Hz / 1F
- IP ratingIPX2
- Installation typeceiling-mount
wall-mount - Fan typeaxial
- Controlautomatic (with sensors)
- Number of speeds1
- Built-in sensorshumidity sensor
timer - Functionsthermal fuse
- Application area (m²)bathroom up to 9 m²
- Warranty (months)36
- Motorball bearings
- Brand
- ReferencedRim 100 HS+TS
- In stock99999 Items
4 other products in the same category
Product safety & compliance
airRoxy sp. z o.o.
ul. Graniczna 40, 44-178 Przyszowice, Polska, Poland
Contact: [email protected] · +48 32 239 42 00 · https://www.airroxy.com